Complete drive + power platform: dual-resistor FOC, 7-speed remote, wall-switch step control, full protection suite.
High-PF power stage + dimming/CCT lighting + customizable remote — one chipset, three subsystems.
Compatible with legacy capacitive wall regulators, 4–5 step speed control without rewiring.
PV storage BLDC fan with phone charging — DC-DC + MTP MCU + BLDC driver combo.
Programmable charge/discharge current — faster charging, longer emergency backup time.
100–440Vac input, 4kV surge, thermal foldback — field-proven for the Indian grid.

Integrates battery charge management, AC power-fail detection and smart emergency discharge. Programmable charge/discharge current, IQ = 4µA @ 3.7V, L/N compatible.
View in selection table →
Integrated 800V JFET, drives external MOSFET up to 20N65 — supports 200W class mid/high-power LED lighting over the full line range.
View in selection table →
800V JFET active PFC buck in critical-conduction mode — high PF, low THD and high efficiency for universal-input LED drivers, external MOSFET up to 20N65.
View in selection table →
120°C thermal foldback protects LED junction temperature. ESOP5 with integrated 4N65 MOS, single-channel 50W modules. Meets 100–440Vac and 4kV surge requirements.
View in selection table →
Primary-side regulated constant-voltage flyback, integrated 650V/2.2Ω MOS, 12V/2A class — high power density, low standby, for motor-drive aux power and strip lighting.
View in selection table →
Fixed 5V / 1.5A output from 25–150Vdc battery input — purpose-built for electric two-wheeler instrument displays. Pin-compatible with 5806L-based PCBs.
View in selection table →
SiC-based HPF PSR constant-voltage platform: line OVP/UVP on the power stage, dimming + CCT on the lighting stage, custom remote functions on the fan stage.
View in selection table →
108MHz Cortex-M0 with CORDIC and hardware divider, integrated gate driver and 3 pairs of P+N MOS, 5–28V motor supply — single-chip BLDC drive.
View in selection table →驱动+电源完整平台:双电阻采样 FOC、7 档遥控、墙壁开关分段调速、全套保护。
高 PF 功率级 + 调光调色照明 + 可定制遥控——一套芯片组覆盖三个子系统。
兼容传统电容调速墙壁开关,4–5 档调速,无需重新布线。
光伏储能 BLDC 风扇,支持手机充电——DC-DC + MTP MCU + BLDC 驱动组合。
可编程充、放电电流——更快充电速度,更长应急照明时间。
100–440Vac 输入、4kV 浪涌、过温降电流——面向印度电网量产验证。

集成 800V JFET,外置 MOSFET 可达 20N65,全电压支持 200W 级中大功率 LED 照明。
在选型表中查看 →
800V JFET 有源 PFC,临界导通模式,高功率因数、低 THD、高效率,外置 MOS 至 20N65。
在选型表中查看 →
120℃ 过温降电流保护灯珠;ESOP5 内置 4N65 MOS 支持单路 50W 模组; 满足 100–440Vac 与 4kV 浪涌要求。
在选型表中查看 →
25–150Vdc 电池输入,固定 5V/1.5A 输出,专为电动两轮车仪表显示设计,兼容 5806L PCB。
在选型表中查看 →
108MHz Cortex-M0,CORDIC+硬件除法器,集成栅极驱动与 3 对 P+N MOS,5–28V 电机供电。
在选型表中查看 →